Tuesday, November 18, 2008

DCTC Nanoindented

This is the 3D view.


We had the idea of indent DCTC in a piece of quartz... so we did...


This was our firts try and it took us less than one hour because we only did 21 indents, the letter D gets one extra indent. Actually the indents themselves take only 2 seconds, 1 to load and another 1 to unload, but the wating time to stabilize the piezo in it's right position requires more time (1 minute for us). The view area of the sample is 100 micrometers squared.
If we have time we will try another time but with more indents and we will give tilted coordinates to the instrument hoping to get a straight image at the end.

2008 Greater Rochester STEM Summit












John demonstrating the laser on the nanoparticles.



Some kids learning about STEM (Science, Technology, Engineering, and Mathematics)




Bob, Kim, and John went to Rochester Community and Technical College representing the AAS degree in Nanoscience Technology on Tuesday, November 4. More than 800 people attended the event and there were 65 booth.

Can you see the link to view the video of the event (it's in your left and top of the screen)?? The pictures were taken by John.




Monday, November 17, 2008

Chapter 4 - Modern Theory of Solids


Kim, Bob, and John right after the last class of elementary quantum physics (chapter 3). They seem happy. :-)

Wednesday, November 12, 2008

English


This is my English class.

Tuesday, November 11, 2008

Optical Diffraction Day



Yesterday in the lab we used many slides with patterns (lines, dots, etc..) to produce diffraction patterns with a laser beam. We measured the distance between the slide and the screen, the distance between the constructively interfered waves and with that we calculated the spacing between the lines in the slide (using Bragg's Law).


I used an optical microscope to check if the spacing was calculated properly, but I could not do this because we needed a calibration standard and we didn't have it (I actually tried to use a ruler as calibration standard but in this way my values were not the same).


Other students used the STM, AFM and nanoindenter...


I'm not in the pictures because I'm holding the camera, and Deb went somewhere when I took the pictures.

Thursday, November 6, 2008

Contact

or go to DCTC web page
You will know if you are in the right place when you see a screen like this one

Wednesday, November 5, 2008

more than half of the semester done

We just did test number 5 in Nanoelectronics!

My Nanoelectronics class math:
17 weeks = 1 semester
17 -11 = only 6 weeks (two test + 5 hw sets + 2 articles report) left

Tomorrow we will have Nanomaterials test about engineering alloys, polymeric materials, ceramics, and composite materials.

(ok, let me explain this post: I don't have anything special to say, but I have a picture that I took today, while some students were re-checking their math in the test, and I want to put it here... and I didn't want to put the picture without any writing.)

The Plan

Hello everyone,

I'm posting the schedule of the major to give a better idea of what classes we take here at DCTC for those who are not familiar with the program. The chart was created by Deb Newberry, she is the founder of the program and also teaches some classes.

Notice that in the chart there is a summer term planned. I opted not to take summer classes; thus, I had to do everything during the normal school year. I'm telling you this because if you plan to do the same then it's good to know that you will have to study a little hard to get a good grade, but don't worry too much because this is a technical school and most teachers don't give huge home works (most... not all) because they assume people have to work.

by the way, Deb was the one who gave us the idea of making this blog which is being really useful for me because now I have an extra stimulus to learn how to write (I'm sorry again for the grammar mistakes).

Monday, November 3, 2008

Nanoscience Technology Blog


This blog is being created by Nanoscience students from Dakota County Technical College in Rosemount, MN, we will post about things we are currently doing (labs, activities, etc) in the program.
I hope this blog will help to promote this amazing program that we are in and thus possible students will have a better notion of what they will learn here at DCTC.

Let me just explain that right now the person writing here is Martim, and English is not my first language thus you will probably see a ton of grammar mistakes because I'm still taking my English classes. :-)

First PS: Dr. John Nelson thinks the landscape is only beautiful to watch on TV and not here in real life because it reminds him that he is in a coooooooold place.
Second PS: Dr. Nelson is the Physics and Nanomaterials professor, and right now he is helping us to look micelles in the microscope.
Third PS: Martim likes the landscape because when the Nanomaterial class is boring he can just look the white of the snow in the window. :-) Martim is cool!